Feelings Interior Paint

Tin Size & price:2.7L | HK$807 0.9L | HK$295

Gloss Grade:Full Matt

Coverage:7-9㎡ x 2 coats / Litre

The highest quality paint often used by master painters and interior designers, it is super durable and scrub resistant with a full-matt finish. This super low-odour waterborne acrylate latex paint is for use on interior walls and ceilings. It has very good hiding power and coverage, offering exceptional resistance to washing with mild non-abrasive cleaning materials.

Note: The price(s) shown above is (are) for white paints only. A tinting fee is charged for paints of other colours.

Enquiry: WhatsApp 90435525, Tel: 34602040, Email: info@tikkurila.com.hk

Payment: Payable to i-Green Element Limited, A/C No. 012-594-00050263, Bank Of China (HK)

Address: Unit 304, 3/F, Hope Sea Industrial Centre, 26 Lam Hing Street, Kowloon Bay, Hong Kong

Country of Origin:Finland

Thinner:Water

Base paints:‘A’ and ‘C’ paints. ‘A’ paint is white in colour and can be applied directly or upon being tinted, ‘C’ paint cannot be applied directly and must be tinted before use.

Chemical resistance:Resists cleaning chemicals and weak solvents, such as White Spirit.

Colour Range:Available in white and the complete Tikkurila Symphony Colour Collection.

Application Details:All surfaces to be painted must be dry, the temperature of the air at least +5°C and the relative humidity of the air below 80%.

Application method:Brush, roller or spray application. For airless spray use a 0.017” – 0.021” spray tip.

Thinning:Thin with up to 10% of water if necessary.

Coverage:

7-9㎡ x 2 coats / Litre

This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, construction methods, and many other factors.

Preparation:

Unpainted surfaces: Remove all dirt and dust. If necessary, smooth the surface with a suitable filler and sand the dried surface. Remove sanding dust. Prime with e.g. Feelings Universal Primer.

Previously painted surfaces: Wash down previously painted surfaces with a Cleaning Agent and rinse carefully with water. Sand hard or glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable filler and sand the dried surface. Remove sanding dust. Prime the surface with e.g. Feelings Universal Primer before coating, if necessary.

Painting:Prime with e.g. Feelings Universal Primer, before applying 2 coats of Feelings Interior Paint. Stir Feelings Interior Paint well before use and thin with up to 10% water, if necessary. Painting should be done on a dry wall at a ROOM temperature above 5℃ and a relative humidity of 80%. Normally touch-dry in ½ hour and recoatable after 2 hours.

Environmental and waste disposalEmpty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.

StorageProtect from frost. Any remaining paint can be preserved for future use with the cap placed back on.

Shelf Life3 years with the cap still intact. The expiry date is marked on the tin.

The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.