Finngard HybriSil

Tin Size & price:9L | HK$4,688

Gloss Grade:Full matt

Coverage:4-6㎡ x 1 coat / Litre

A waterborne exterior paint pioneering the use of nanotechnology that creates a self-cleaning function with its nanoparticles effectively preventing the accumulation of dirt on its coating. It also possesses superior hiding power. Surfaces treated with HybriSil are tough and hard, and are therefore durable and scratch-resistant, maintaining a decent outlook of the building for many years. The paint is especially suitable for use on luxury houses and villas.

Note: The price(s) shown above is/are for white paints only. A tinting fee is charged for paints of other colours.

Country of Origin:Finland

Base paint:LA

Colour Range:Light colours in Tikkurila Exterior colour card

Thinner:Water

Drying time:Recoatable after 12 hours at a temperature of 23℃ and a relative humidity of 50%.

Carbon dioxide permeability:> 50M

Water vapour permeability:<0.2M

Water permeability:< 0,1 kgm-2h-0,5

Bond strength:> 1.5 N / mm2

Weather resistance:Well adapted to industrial and marine environments, and highly resistant to moisture penetration.

Density:

Application Details:

Application method:Brush, roller or spray application. For airless spray use a 0.013” – 0.019” spray tip.

Coverage:

4-6㎡ / L

This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, construction methods, and many other factors.

Thinning:Thin with up to 10% of water if necessary.

Preparation:

Unpainted surfaces: Clear all dirt and dust from wall surfaces. Concrete structures must undergo a heat cycle to prevent the easy deformation of components. Any glass-like stones in the concrete can be treated with sandblasting. In case of there being too much cement binder, it can be cleared using sandblasting, wire-brushing　or sand-washing. It is recommended that the cement wall be painted 1 to 2 months after it has solidified.

Painted surfaces: Remove any loose or chalking paint from the wall surface. The removal method to be selected will depend on the substrate strength and means of construction, including the use of wire-brushing, high-pressure water and sand-washing. Cracks in the concrete may be opened to check for the presence of any rusty steel.

Primer:Finngard Primer is used for treating the substrate.

Maintenance:Wash the exterior wall carefully only after a month of painting. After washing, a watermark may be left on the wall making it conspicuous along the edge of the washed area. Algaecides or cleaning chemicals may be used to remove algae and mildew.

Environmental and waste disposalEmpty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.

The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.