Taika Glow

Tin Size & price:1L | HK$1185 0.333L | HK$486

Gloss Grade:Matt

Coverage:8-12㎡ / Litre

A waterborne special lacquer that is translucent and slightly yellowish during daylight time. Itglows greenish in the dark, and is to be used on painted surfaces. Its glowing effect appears best on white or light substrate in total darkness. It requires a sufficiently powerful light intake before dark to create a glowing effect for up to 6 hours.

Enquiry: WhatsApp 90435525, Tel: 34602040, Email: info@tikkurila.com.hk

Payment: Payable to i-Green Element Limited, A/C No. 012-594-00050263, Bank Of China (HK)

Address: Unit 304, 3/F, Hope Sea Industrial Centre, 26 Lam Hing Street, Kowloon Bay, Hong Kong

Recommended Use:Effect painting in dry interior premises and on wall surfaces, furniture, floors and objects with a protective lacquer. In case of power suspension, it can also be used for showing exit routes in the dark, in addition to the usual path route signs.

Colour:Translucent and slightly yellowish in daylight time. It glows greenish in the dark.

Country of Origin:Finland

Coverage:

8-12m2 x 1 coat/Litre

This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, construction methods, and many other factors.

Thinner:Water

Application method:Brush, roller or spray application, and special effect painting tools

Cleaning of tools:Clean the tools with water and soap immediately after use.

Maintenance Instructions:The product achieves its final durability after one month from finishing treatment. Avoid cleaning treatment during this period. If needed, the surface can be cleaned with a neutral (pH 6-8) dish washing solution using e.g. a soft cleaning cloth. Rinse and dry the surface immediately after that.

Preparation:

Unpainted surface: Remove dirt and dust from new surfaces. Fill the surfaces with filler, if needed, and sand the dried surface. Remove sanding dust.

Previously painted surface: Wash down previously painted surfaces with a suitable cleaning detergent. Allow to dry. Remove any loose paint. Sand hard, glossy and painted surfaces matt. Remove sanding dust. Fill cracks and holes with Filler and sand the dried surface. Remove sanding dust.

Painting:

The surface to be painted must be dry, solid and clean. It should be coated with a layer of light coloured wall paint before one or several coats of Taika Glow are painted on top.

Stir Taika Glow well before use. Apply the lacquer liberally with a short-napped roller or brush. Aim to make the surface as smooth as possible and try to apply the Taika Glow evenly throughout the whole surface. Use masking tape and remove the tape immediately after painting. A stronger glow effect can be achieved with a two-coat (or several) treatment. Taika Glow surface can be protected with e.g. Parketti-Ässä Floor Lacquer or Kiva Furniture Lacquer. Note! Verify the success of the treatment in the dark.

Application Conditions:The surface to be painted must be dry, the temperature of the air at least +10°C, and the relative humidity of the air between 30 – 70 %.

Drying time:Apply the second coat after 6 hours when the paint is completely dried.

Safety & Environment protection:Wear gloves, safety cap and goggles for protection. Liquid waste should be destroyed according to local regulations.

Storage:Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on.

Shelf life:3 years with the cap still intact. The expiry date is marked on the tin.

The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.