Betolux Akva Wood Paint

Tin Size & price:0.9L | HK$500

Gloss Grade:Semi gloss

Coverage:5-7㎡ x 2 coats / Litre

High-quality waterborne polyurethane-acrylate paint for wooden furniture and floors with VOC emissions lower than 1/4 of those from oil-based ones. It allows you to move into your home immediately after furniture or floor painting is completed. It can be tinted to a wide range of colours that do not fade for a long time. With super-high hardness, it is resistant to normal stress and scuffing.

Country of Origin:Finland

Thinner:Water

Base paints:‘A’ and ‘C’ paints. ‘A’ paint is white in colour and can be applied directly or upon being tinted, ‘C’ paint cannot be applied directly and must be tinted before use.

Chemical resistance:Resists cleaning chemicals and weak solvents.

Colour Range:Available in white and the complete Tikkurila Symphony Colour Collection.

Application Details:

Application method:Brush, roller or spray application.

Coverage:5-7㎡ x 2 coats / litre. This information is only intended as a guide. Actual spreading rate will depend upon texture, porosity and hardness of the wood.

Thinning:Thin with up to 10% of water if necessary.

Preparation:The surface to be painted must be clean, dry and free of grease and dust, with a PH value of less than 10 and a humidity of lower than 10%.

Painting:Painting should be done at a temperature above 5℃ and a relative humidity below 80%. Wear gloves, a safety cap and eye protectors and keep the environment well ventilated when painting.

Drying time:Normally touch-dry in 1/2 hour and recoatable after 2 hours at a temperature of 23 ℃ and a relative humidity of 50%.

Environmental and waste disposalEmpty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.

StorageThis is a waterborne paint that must be kept well sealed in storage at a temperature below 35℃. Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on.

The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.