Tin Size & price:2.7L | HK$1,618
Coverage:7-9㎡ x 2 coats / Litre
A top-class product worldwide, having been awarded the greatest number of international environmental accreditations with near-zero VOC and formaldehyde emissions, as well as anti-allergic and anti-asthmatic properties. In case of a fire, it can save lives by delaying burning and reducing harmful gas emissions at critical times. With a superfine matt-finish, it is not only super eco-friendly, but also highly durable with excellent abrasion resistance and is easily cleaned.
Note: The price(s) shown above is (are) for white paints only. A tinting fee is charged for paints of other colours.
Enquiry: WhatsApp 90435525, Tel: 34602040, Email: email@example.com
Payment: Payable to i-Green Element Limited, A/C No. 012-594-00050263, Bank Of China (HK)
Address: Unit 304, 3/F, Hope Sea Industrial Centre, 26 Lam Hing Street, Kowloon Bay, Hong Kong
Country of Origin:Finland
Base paints:‘A’ and ‘C’ paints. ‘A’ paint is white in colour and can be applied directly or upon being tinted, ‘C’ paint cannot be applied directly and must be tinted before use.
Chemical resistance:Resists cleaning chemicals and weak solvents, such as White Spirit.
Colour Range:Available in white and the complete Tikkurila Symphony Colour Collection.
Application method:Brush, roller or spray application.For airless spray use a 0.017” – 0.021” spray tip.
Thinning:Thin with up to 10% of water if necessary.
This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, application methods, and many other factors.
Preparation:Remove all dirt and dust from an unpainted surface. The remaining coating on a previously painted surface should be thoroughly cleaned with detergent and water before being sanded. If necessary, fill any cracks and smooth the surface with a suitable filler, and sand the dried surface. Painting should be done on a dry wall at a ROOM temperature above 5℃ and a relative humidity of 80%. Remove the sanding dust.
Painting:Prime with e.g. Varma Primer, before applying 2 coats of Joker. Stir well before use and thin with up to 10% water, if necessary. Normally touch-dry in ½ hour and recoatable after 2 hours.
Environmental and waste disposalEmpty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
StorageProtect from frost. Any remaining paint can be preserved for future use with the cap placed back on.
Shelf Life3 years with the cap still intact. The expiry date is marked on the tin.
The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.
Contact us if you are interested.